SportstAir

Tail Rail Edge

The Tail Rail Edge enhances the performance of the boards by allowing a quick water release. This technology is featured on the SE 3DS (except AnglAir and MonstAir) and LE 3DS models.

SuperLight

MonstAir

AnglAir

AdventurAir

SurfAir

Venus

WindsupAir

CruisAir

Superior Edition

Light Edition 3DS

Light Edition 3DS The pre-laminated double layer Light Edition construction is the ultimate in light weight. The machine-pre-laminated 2 layers of air tight PVC creates a durable shell of accurate thickness. This shell is then machine laminated directly onto the 500D Polyester Drop Stitch fabric. We offer the LE 3DS boards both in 5” (for …
More

Pre-Lamination

Our Triple Layer Composite and our Double Layer constructions both include the specially developed process of pre-lamination. This high tech process consists of machine-lamination of the multiple layers into a shell that has accurate thickness as well as superior abrasion and stretch properties. Compared to normal double layer boards we have been able to remove …
More

Light Edition

LE – Light Edition The pre-laminated double layer Light Edition construction is the ultimate in light weight. The machine-pre-laminated 2 layers of air tight PVC creates a durable shell of accurate thickness. This shell is then machine laminated directly onto the 500D Polyester Drop Stitch fabric. We offer the LE boards in 5″ and 6” …
More

Welded Seam Technology

JP-Australia developed the Welded Seam Technology to increase the durability and air tightness of our inflatable boards. The connection between the rail and the drop stitch material is hot air welded thus creating a very strong mechanical joint that turns these two parts into one. The plasticizers in PVC migrate over time and weaken the …
More

3D Stringer

The 3D stringer is the most innovative solution to increase the stiffness of an inflatable board. It connects the deck, rail and bottom into one strong and solid U-beam. This has increased the stiffness of the boards up to 30%. Furthermore, the 3D Stringer increased the glued overlap surface in the high stress standing area, …
More

Superior Edition 3DS

Superior Edition 3DS The 3 pre-laminated composite layers consist of 2 airtight PVC sheets bonded to a Polyester 1000D fabric to create one super strong shell. This shell is then machine laminated directly onto the 500D Polyester Drop Stitch fabric. The pre-lamination and the composite structure create an unprecedented weight/stiffness/durability ratio ever produced in an …
More

AllroundAir