Downwind

While many downwind-specific SUP shapes on the market share similar designs, we have decided to take a different approach for our Downwind S-TEC. We believe that the extreme beveled or fully rounded bottom and rail shapes create significant instability that causes discouragement for beginners. Therefore, we decided to go for a very flat bottom section where it matters the most: Right in the standing area. The stability to get going is the primary objective here. We have used the advantages of roundness and beveled rail/bottom contours only where they are needed. The nose area is rounded for forgiving and smooth touchdowns, while the abruptly beveled pin-tail can be easily sunk as you engage it to achieve flight. We paid special attention to the shape of the rail with keeping the apex of the rail radius as high as possible to further enhance stability. The deck features a slight concave in the standing area that transforms into a slope towards the nose, ensuring optimal engagement as you transfer the paddle power into the forward momentum. Simply put, the slope prevents the front foot from sliding forward in the crucial moment of the paddle stroke.
Apart from the importance of the shape features, the next essential characteristic of a good downwind board is keeping it as light and stiff as possible. Low swing weight and stiffness for a direct response are essential. Here we decided not to cut any corners. We offer the board exclusively in our most advanced high-end S-TEC technology. Precise CNC cut core is wrapped in a full PVC sandwich with lightweight Biax carbon and additional UNI-directional Carbon patch covering the length of the standing area as well as the mirrored bottom area supporting the foil. A special method of lamination is used to achieve a pre-preg resin-to-fiber ratio. This creates a feather weight Triax carbon PVC sandwich shell for the ultimate in composite board construction.
To further enhance the weight saving, we opted for a brushed-off topcoat covering the carbon. The faded painted nose and tail rail area with bright and fluorescent colors are there for visibility and safety at sea.

ALL-NEW TRACKS!
We redesigned the tracks that now have large openings for an easy foil-to-board assembly: Simply drop the plate nuts into the track while they are mounted on the foil, slide them into position and tighten the screws. To remove the foil, just loosen the screws and slide the foil backward and upwards.
We decided not to add any additional openings to the tracks as this would dramatically reduce their structural integrity. All boards featuring the new tracks are now equipped with a standard set of 4 plate nuts. These nuts ensure a perfect fit to the tracks, superior load distribution and ideal thread engagement.
The foil positioning scale between the tracks is mirrored in the design of the deck EVA pad, allowing you to know exactly where your foil is placed in relation to your back foot position.
The EVA pad has a fine corduroy pattern for comfort.

Technical details:
* Rounded nose area for forgiving and smooth touchdowns.
* Beveled pin-tail to allow sinking the tail to achieve flight,
* Slight concave deck in the standing area for good grip and efficient power transfer* Low swing weight and stiffness for a direct response,
* Most advanced high-end S-TEC construction.
* Feather weight Triax carbon PVC sandwich shell for the ultimate in composite board construction.
* Fluorescent nose and tail colors for visibility and safety.
* All-new tracks for an easy foil-to-board assembly.
* Includes a set of 4 plate nuts.
* The scale between the tracks is mirrored in the design of the deck EVA pad for easy foil positioning.