Wave Slate

Wave Slate

79    87    96
  • PRO

A NEW DIMENSION OF ALLROUND WAVE 

We developed 3 totally new shapes for 2018. The concept is still based on a parallel outline which is the foundation of this board line. It reduces drag and increases lift, resulting in more speed and earlier planing while its short length makes critical, tight turns feel very natural.

It offers the most efficient volume distribution possible and makes the board extremely stable, even when not planing. This means that the boards can be shorter and narrower than previous concepts. The swing weight is more centered, speeding up rotations and change of direction.

We reduced the board’s nose and tail width. The narrower nose in combination with additional rocker in the front gives you a safer feel on the wave during turns and when lining up jumps.The smaller tail makes the board more versatile on the wave face and going vertical very easy.
The bottom shape includes various V and concave shape concepts. The nose entry and front section of the board is equipped with strong V for a soft entry. Between the foot straps we use a deep single concave which creates a flat section. Due to the channel effect of the concave the water accelerates and provides additional lift for early planing and high speed. Towards the tail we use a flat V for great water release.

The new Wave Slate uses in general a flatter rocker along the center-line than the previous generation. This increases early planing and speed performance. The stronger V definition and narrower outline at nose and tail gives the board a curvier rail line compared to the first generation. The combination of the above-mentioned shape features gives the boards 2 totally different rocker lines.

The center line is quite flat and responsible for its speed and early planing performance. Once railed up, the curvy rail line takes over and delivers outstanding maneuverability. This bottom concept is widely used in surf boards and the performance is proven. The result combines the surf board feeling with the performance expected from a modern windsurf board.
The boards come with a THRUSTER fin setup but the hull is equipped with 2 Mini Tuttle and 3 Slot Boxes. It opens up all trim options -also QUAD- and suits every rider’s style.

>> Our goal was to widen the range of use and deliver outstanding performance in any conditions and we are proud to say that this is JP’s best-ever wave all-rounder.


The boards additionally come with plugs to cover all fin boxes.
PRO EDITION in S-Glass Technology with stringers and basalt rails.

Wave Slate 79
Length
cm / inch
215
7'1"
Length
cm / inch
215
7'1"
Width
cm / inch
55.0
21.7"
Volume
liters
79
WEIGHT +/-6%
kg / lbs
5.9
13.0
Thruster Fins
(come with boards)
1x Wave 18 [RTM] SB
+ 2x Side Fin 10 [RTM] MT
Alternative Fins
for QUAD Set-Up
2x Multi Wave 13.5 SB
Sailsideal: 4.0-5.2
rec.: <5.5
Wave Slate 87
Length
cm / inch
219
7'2"
Length
cm / inch
219
7'2"
Width
cm / inch
57.0
22.4"
Volume
liters
87
WEIGHT +/-6%
kg / lbs
6.1
13.4
Thruster Fins
(come with boards)
1x Wave 19 [RTM] SB
+ 2x Side Fin 10 [RTM] MT
Alternative Fins
for QUAD Set-Up
2x Multi Wave 14.5 SB
Sailsideal: 4.5-5.6
rec.: 4.0-6.2
Wave Slate 96
Length
cm / inch
219
7'2"
Length
cm / inch
219
7'2"
Width
cm / inch
59.0
23.2"
Volume
liters
96
WEIGHT +/-6%
kg / lbs
6.3
13.9
Thruster Fins
(come with boards)
1x Wave 20 [RTM] SB
+ 2x Side Fin 10 [RTM] MT
Alternative Fins
for QUAD Set-Up
2x Multi Wave 15.5 SB
Sailsideal: 5.0-6.0
rec.: 4.4-6.4
Wave Slate
Thruster Fins
(come with boards)
RTM = Resin Transfer Molded
Alternative Fins
for QUAD Set-Up
SB= Slot Box
SailsMT = Mini Tuttle box

Fin-Setup-rq-tq-wsl-4xFin-Setup-rq-tq-wsl-3x

Fin-Setup-rq-tq-wsl-2xFin-Setup-rq-tq-wsl-1x

The RADICAL THRUSTER QUADs, WAVE SLATEs and THRUSTER QUADs feature 5 fin boxes:

  • 3 Slot Boxes with 2 covers and
  • 2 side fin Mini Tuttle boxes with 2 covers
The boards are equipped with the fins which suit their character best. Still, you can acquire additional spare fins to trim the boards according your requirements or the given conditions. So, each board can be used in every possible setup: quad, thruster, twinser or even single-fin. To cover the same range of use, the main thruster- or the 2 twinser fins should be 2 cm bigger than the quad fins, and the single-fin should bigger again - minimum 2 but up to 5 cm.

Advantages of each setup:

SINGLE: "Drive", directional feel, good planing.

THRUSTER: The maneuverable version of the single fin setup with better control. The best on- to side-shore wave riding option overall.

QUAD: the best side-offshore down-the-line wave riding option overall

TWINSER: Livelier version to the quad setup.

doubleheelpad-300x141

DOUBLE HEEL PADS

RADICAL THRUSTER QUAD, WAVE SLATE, THRUSTER QUAD, YOUNG GUN RADICAL THRUSTER QUAD
6 + 4 mm = 10mm pads in the heel area. Great shock absorbing effect - very comfortable. Your heels are higher on the board for more power and control on your forefoot. Initiating turns is really easy.


doublecomfortpad-300x213

DOUBLE COMFORT PADS

FREESTYLE WAVE, FREESTYLE, ALL RIDE, MAGIC RIDE, X-CITE RIDE, SUPER SPORT, YOUNG GUN FREESTYLE
6 + 4 mm = 10mm pads in the actual standing area provide unbelievable shock absorption and comfort.

Footstrap-2014

Comfortable footstrap incl. 2 screws. Anti-twist system. Adjustable plastic plates for width adjustment.

ADJUSTABLE WIDTH

Adjustable in width not just in length. By simply turning the plastic plate by 180 degrees, the width of the foostraps can be reduced by 0.6cm (one plate) respectively 1.2cm (both plates). Great for slalom sailors who need a tight connection to the board and for youngsters or women with smaller feet.

HOW TO adapt your footstraps to large feet or sailing with boots

Adjust your Foot Strap SIZE for very large foot strap sizes, change the Anti Twist plate for the outside position - recommended for foot size 11 (US) / 10 (UK) and bigger.
  • remove the screw
  • remove the Anti Twist plate
  • insert the bottom part of the Anti Twist plate into the outside holes of the belt
  • put the top plastic part back on the pins
  • insert the screw
  • adjust the size of the foot strap to fit your foot
 

HOW TO adapt your footstraps to small feet:

5 Steps for a NARROW Foot Strap:
  • remove the screw
  • pull off the top plastic part
  • rotate the top plastic part 180°
  • put it back on the pins
  • insert screw and mount the strap
 

3D FOOTSTRAP

Strap incl. 2 screws.

Comfortable padding, changeable to asymmetrical shape when the strap is not centered - very comfortable!

set-up

Symmetrical - for rear center strap

Asymmetrical - for front straps and rear straps on the rail

Download

HowToAdjust.pdf

QUAD FIN USE
Slot Box Board WAVE SLATE
Size 79 87 96
Size Length Area (cm2) Recomm. Sails <5.5 4.0-6.2 4.4-6.4
MULTI WAVE (RTM) & G10
12.0 4.7" 87 <4.7 <4.7 <4.7  
13.0 5.1" 97 <5.0 <5.0 <5.0 <5.0
13.5 5.3" 104 <5.2 4.0-5.0 <5.2 <5.2
14.5 5.7" 114 4.2-5.4 5.5 4.2-5.4 4.4-5.6
15.5 6.1" 128 4.5-5.8 5.0-5.8 5.0-5.8
16.5 6.5" 139 5.0-6.2 5.5-6.2 5.5-6.2
WEED TWINSER WAVE (G10) use without side fins
16 6.3" 168 <5.0 <5.0 <5.0 <5.0
18 7.1" 192 >4.7 >4.7 >4.7 >4.7

 

THRUSTER FIN USE
Slot Box Board WAVE SLATE
Size 79 87 96
Size Length Area (cm2) Recomm. Sails <5.5 4.0-6.2 4.4-6.4
WAVE (RTM) & G10 use without side fins
18 7.3" 142 <4.7 4.0-5.2 <5.0 <5.0
19 7.5" 157 <5.2 4.4-5.4 4.5-5.6 <5.4
20 7.9" 166 4.0-5.5 4.7-5.8 4.7-5.8 5.0-6.0
21 8.2" 176 4.4-5.8 5.4-5.8 5.0-6.0 5.2-6.0
22 8.5" 189 4.7-6.0   5.4-6.2 5.4-6.2
23 9.0" 198 5.0-6.2   5.8-6.2 5.8-6.2
24 9.4" 211 5.4-6.2     5.8-6.4
25 9.8" 221 >5.4     >6.0
WEED WAVE (G10) use without side fins
21 8.3" 245 <6.2 <5.5 4.0-6.2 4.2-6.2
23 9.0" 268 4.7-6.5   4.7-6.2 4.7-6.2
26 10.2" 309 >5.4     5.4-6.2
Boards come with: 1x fin (yellow), 2 Side Fins (Thruster set-up) + 2 Mini Tuttle Box covers
For Quad use in the same range use 2x~5-7cm smaller fins (table on the left)

LIMITED FINISH - LESS IS MORE

Since 2004 the first JP PRO Edition boards have a (SUPER) LIMITED FINISH. By reducing the amount of paint (sanding off) the weight is decreased. Consequently, the boards have a custom look with certain "imperfections" in the paint, thus the material below might shine through. Sometimes they even look as if repaired. This is also true for the Full Wood Sandwich boards as they now feature a LIMITED FINISH, too. You won't find two boards exactly the same. We believe this is worth it as the weight reduction is substantial and there's no loss of durability or strength.

STORAGE

Store your board in mild (neither hot, nor cold; not exposed to sunlight), dry places ! Winter storage: non-freezing (constantly above +5 C). Note: Avoid storage in closed, damp conditions like in a wet boardbag! So, after windsurfing and safe transport put the board out of its bag and let both dry separately - otherwise your board will suffer from osmosis and blisters (bubbles) will show up on the boards surface. And your bag might start to smell.

AIR VALVE

airvalveWe highly recommend to open the air valve screw when the board is not used. Reason: Due to high pressure differences the sandwich construction suffers from high stress and can delaminate long term from the board's core. This will result in a soft spot and start absorbing water. Pressure differences are caused by high temperature variations or other pressure variations from e.g. aero planes. Do not forget to close the air vent before going on the water!

NOSE PROTECTOR

UNI-Noseprotector-BLACK-neu02 Damages caused by impacts are not covered under JP-Australia's limited warranty. Therefore, JP-Australia highly recommends the use of a nose protector.

Especially recommended for novices and everybody, who wants to protect the board nose.

The universal protector: Made of EVA, the UNI NOSE PROTECTOR is a very light yet strong protection. It is easy to handle as it is simply glued onto the nose.

The set consists of 6 pieces: 2 side parts (one left and one right), and 4 connections in sizes Small, Medium, Large and "Wave Slate".

By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently.

This makes it an universal protector not only for JP boards but for most boards available on the market.

DOWNLOAD: NoseProtector_Uni_Manual.pdf

  • BOARDBAG LIGHT - XS / ~230 x 60 cm: Radical Thurster Quad 69-94, Thruster Quad 76-95, Freestyle Wave 79, Freestyle 85, Speed 45-54, Young Gun Radical Thurster Quad
  • BOARDBAG LIGHT - Wave Slate / ca. 220 x 60 cm : Wave Slate 79-96
  • BOARDBAG LIGHT - S / ~240 x 65 cm: Thruster Quad 102, Freestyle Wave 86-113, Freestyle 92-105, All Ride 106II, Magic Ride 97, Super Ride102, Super Sport 101, Slalom 55-62
  • BOARDBAG LIGHT - M / ~245 x 70 cm: All Ride 116II, Magic Ride 103, Super Ride 116, Super Sport 113, Slalom 68-71
  • BOARDBAG LIGHT - L / ~250 x 75 cm: Magic Ride 112-119, X-Cite Ride Plus 125-135, Super Ride132, Super Sport 125, Young Gun Magic Ride
  • BOARDBAG LIGHT - XL / ~255 x 80 cm: Magic Ride 130-142, X-Cite Ride Plus 145, Super Ride146
  • BOARDBAG LIGHT - XXL / ~240 x 90 cm: Super Sport 137, Slalom 82-85, HydroFoil 135, 155
  • BOARDBAG LIGHT - XXXL / ~250 x 92 cm: Magic Ride 154, Superlight Wind 165
  • BOARDBAG LIGHT - HYDROFOIL / ~220 x 90 cm: HydroFoil 135-155

boardbag-WS-light

TEAMRIDER BOARDBAG

Heavy duty padding, compression belts, extra padding on nose and side, comfortable handles. Takes up to 4 boards. Flight approved.

~240 x 70 cm
~235 x 80 cm
~265 x 80 cm

boardbag-WS-team