You are on the JP 2015 Website. Check out the 2016 page!
SUP 2015

Surf
Wide Body

7‘4“x31“ • 8‘2“x32“
8‘8“x32“ • 9‘3“x32“

logo-surfwidebodyicons-surf-surf-widebody

PRO Edition with glossy rails
Wood Edition with glossy rails
AST with matt finish

CURVE RADICALI – OTTIMA STABILITÀ 

La lunghezza della tavola è sempre stata la limitazione principale quando si surfano le onde ripide che frangono a riva. Per questo motivo abbiamo lavorato su un range di tavole molto corte, e compatte, in grado di eseguire curve con raggi molto stretti. Abbiamo mantenuto la giusta stabilità necessaria quando si è sulla line-up e specialmente mentre si sta pagaiando per uscire dalle schiume a riva.

Lo shape presenta una zona di piatto in coperta, specialmente nella zona in cui si sta in piedi. I bordi sono molto arrotondati e sottili come piacciono a tutti coloro che surfano onde radicali. Anche se la tavola è molto larga, si ha la sensazione di usare uno “short board”.

La configurazione Quad conferma il carattere radicale della linea. Anche quando la tavola sta navigando sul bordo ci sono sempre due pinne che ti guidano durante la curva.

Lo shape presenta un mono-concavo nella parte anteriore che si modifica in una V piatta che va accentuandosi verso la poppa per aumentare il rocker.

Anche la linea SURF WIDE BODY si allarga con l’introduzione del nuovo 9’3”x32”, il più voluminoso del gruppo. Il nuovo arrivato mantiene i bordi sottili e, malgrado i sui ben 146 litri di volume, la maneggevolezza delle misure più piccole. Il SURF WIDE BODY 8’8”x32” è adesso anche disponibile nella versione con tecnologia AST, semplice ed economica.

___________________________________________________

DIFFERENZE TRA LA LINEA SURF E LA LINEA SURF WIDE BODY

La linea SURF è destinata maggiormente ad un uso su grandi onde, mentre la SURF WIDE BODY dà il meglio di sé nelle onde piccole e nello shore break.

In base alla misura, entrambe le soluzioni sono comunque adatte a soddisfare tanto i surfisti intermedi quanto a quelli esperti.

___________________________________________________

Tecnologia a finiture:  PRO edition con bordi lucidi

La tavola viene fornita con: copertura in EVA nella zona di manovra in cui si sta in piedi, attacco per il leash, 4 pinne in Resin Transfer Molded (RTM) FCS, vite della valvola, pad di tail-kick, attacco FCS a prua per la GoPro e inserto a vite per la vela da windsurf.

Tecnologia e finiture: Wood Edition con bordi lucidi

Tecnologia e finiture:   AST con finitura opaca

Le tavola viene fornita con: copertura in EVA nella zona di manovra in cui si sta in piedi, attacco per il leash, 4 pinne FCS in Injection Molded (IM), vite della valvola, pad di tail-kick e inserto a vite per la vela da windsurf. Le versioni Wood Edition hanno l’attacco FCS a prua per la GoPro.

Description

Specifications shaped by Werner Gnigler

Surf Wide Body Length
cm / inch
Width
cm / inch
Volume
liters
Thickness
CM / INCH
Weight PRO
+/-6% KG / LBS
Weight WE
+/-6% KG / LBS
Weight AST
+/-6% KG / LBS
Fins PRO Fins WE/AST
7'4"x31" 224
7'4"
79
31"
111 10.4
4.1"
6.5
14.3
7.9
17.4
2x Thruster R5 [RTM II] +
2x Thruster R3 [RTM II]
2x FCS M5 [IM] +
2x FCS M3 [IM]
8'2"x32" 249
8'2"
81
32"
124 10.2
4.0"
7.3
16.1
8.7
19.2
2x Thruster R7 [RTM II] +
2x Thruster R3 [RTM II]
2x FCS M7 [IM] +
2x FCS M3 [IM]
8'8"x32" 265
8'8"
81
32"
135 10.5
4.1"
7.7
17.0
9.3
20.5
t.b.a. 2x Thruster R7 [RTM II] +
2x Thruster R5 [RTM II]
2x FCS M7 [IM] +
2x FCS M5 [IM]
9'3"x32" 282
9'3"
81
32"
146 10.5
4.1"
t.b.a. t.b.a. 2x Thruster R7 [RTM II] +
2x Thruster R5 [RTM II]
2x FCS M7 [IM] +
2x FCS M5 [IM]
Surf Wide Body 7'4"x31"
Length
cm / inch
224
7'4"
Width
cm / inch
79
31"
Volume
liters
111
Thickness
CM / INCH
10.4
4.1"
Weight PRO
+/-6% KG / LBS
6.5
14.3
Weight WE
+/-6% KG / LBS
7.9
17.4
Weight AST
+/-6% KG / LBS
Fins PRO 2x Thruster R5 [RTM II] +
2x Thruster R3 [RTM II]
Fins WE/AST2x FCS M5 [IM] +
2x FCS M3 [IM]
Surf Wide Body 8'2"x32"
Length
cm / inch
249
8'2"
Width
cm / inch
81
32"
Volume
liters
124
Thickness
CM / INCH
10.2
4.0"
Weight PRO
+/-6% KG / LBS
7.3
16.1
Weight WE
+/-6% KG / LBS
8.7
19.2
Weight AST
+/-6% KG / LBS
Fins PRO 2x Thruster R7 [RTM II] +
2x Thruster R3 [RTM II]
Fins WE/AST2x FCS M7 [IM] +
2x FCS M3 [IM]
Surf Wide Body 8'8"x32"
Length
cm / inch
265
8'8"
Width
cm / inch
81
32"
Volume
liters
135
Thickness
CM / INCH
10.5
4.1"
Weight PRO
+/-6% KG / LBS
7.7
17.0
Weight WE
+/-6% KG / LBS
9.3
20.5
Weight AST
+/-6% KG / LBS
t.b.a.
Fins PRO 2x Thruster R7 [RTM II] +
2x Thruster R5 [RTM II]
Fins WE/AST2x FCS M7 [IM] +
2x FCS M5 [IM]
Surf Wide Body 9'3"x32"
Length
cm / inch
282
9'3"
Width
cm / inch
81
32"
Volume
liters
146
Thickness
CM / INCH
10.5
4.1"
Weight PRO
+/-6% KG / LBS
t.b.a.
Weight WE
+/-6% KG / LBS
t.b.a.
Weight AST
+/-6% KG / LBS
Fins PRO 2x Thruster R7 [RTM II] +
2x Thruster R5 [RTM II]
Fins WE/AST2x FCS M7 [IM] +
2x FCS M5 [IM]
finne01

Stand Up [RTM]
5.5“|6.5“|8.0“|9.0“

fin02

Stand Up [RTM-II]
5.5“|6.5“|8.0“|9.0“

fin03

Stand Up [IM]
8.0“|9.0“

fin04

Race Wide [RTM-II]
8.3“

fin05

Race [RTM-II]
8.4“

fin06

Thruster [RTM-II]
R 3|5|7

fin07

FCS fin set
M 3|5|7

fin08

Soft Fin [PE]
4.6“|6.1“

fin09

Air SUP fin [PE]
9.0“

pixel

Fin Technologies:
RTM & RTM-II = Resin Transfer Molded
IM = Injection Molded Nylon
FCS Thruster = Injection Molded
PE = Injection Molded Polyethylene

Rail Tape Daggerboard

CARBON  PRO  PADDLES

No compromise! 100% Carbon CNC shaped high density PVC core blade! 100% Carbon shaft! This is the only way to achieve lowest weight, quickest response and ultimate performance. The dihedral foiled blades feature a generous ABS edge for the protection of your board and the blade. The handles are made of 100% Carbon, the Cut-To-Length handle is covered with a comfortable EVA. Blade: 100% Carbon with ABS edge. Shaft:  100% Carbon with matt finish Blade Area (Size): • 85 inch2 (17.7“ x 7.4“, 45 x 19 cm) • 92 inch2 (17“ x 8.3“, 43 x 20.5 cm) 1-piece - Cut To Length: <7‘4“, <223 cm  |  Weight 450g (blade 85), 470g (blade 92) 2-piece - Length  6‘0“-7‘4“, 183-223 cm  |  Weight 590g (blade 85), 600g (blade 92) 3-piece - Length 6‘0“-7‘4“, 183-223 cm  |  Weight 690g (blade 92)

paddles_carbon_pro

CARBON PADDLES

100% Carbon CNC shaped high density PVC core blade with a 60% Carbon shaft is a great performance paddle. We kept the “swing weight” low by using the full carbon blade. The 60% Carbon shaft is a better option for those looking for a slightly forgiving feel at a really low weight predominantly in waves or touring. The dihedral foiled blades feature a generous ABS edge for the protection of your board and the blade. The handles are made of 100% Carbon, the Cut-To-Length handle is covered with a comfortable EVA. Blade: 100% Carbon with ABS edge Shaft: 60% Carbon with matt finish Blade Area (Size): • 85 inch2 (17.7“ x 7.4“, 45 x 19 cm) • 92 inch2 (17“ x 8.3“, 43 x 20.5 cm) 1-piece - Cut To Length:  <7‘4“, <223 cm  |  Weight 540g (blade 85), 560g (blade 92) 2-piece - Length 5‘6“-7‘4“, 168-223 cm  |  Weight 650g (blade 85), 680g (blade 92) 3-piece - Length 5‘10“-7‘4“, 179-223 cm  |  Weight 720g (blade 85), 750g (blade 92)

paddles_carbon GLASS PADDLES

The full composite fiberglass construction provides performance at great value. Fiberglass flexes naturally and is therefore easy on your shoulders and back. The stringer inside the blade creates stiffness while the full fiberglass pressure molded blade is leak proof. ABS handle. The shafts have a horizontally roughened surface for a good grip. Blade: fiberglass Shaft:  fiberglass with glossy rough finish Blade Area (Size): • 90 inch2 (17“ x 8.3“, 43 x 21 cm) 2-piece - Length: 5‘7“-7‘5“, 171-226 cm  |  Weight 790g 3-piece - Length: 5‘11“-7‘5“, 181-226 cm  |  Weight 880g

paddles_glass

GLASS  PE  PADDLES

This combination of a light fiberglass shaft and a tough fiber-glass reinforced Polyethylene (PE) blade is a great alternative to heavy alloy paddles. Due to the longitudinal structural reinforcements, the PE blades are very light but also very stiff. They also feature a soft rubber edge for protection. ABS handle. The shafts have a horizontally roughened surface for a good grip. Blade: glass PE Shaft:  fiberglass with glossy rough finish Blade Area (Size): • 90 inch2 (17“ x 8.3“, 43 x 21 cm) 2-piece - Length: 5‘2“-7‘0“, 158-214 cm  |  Weight 850g 3-piece - Length: 5‘7“-7‘0“, 170-214 cm  |  Weight 940g

paddles_glass_pe  

ADJUSTMENT SYSTEM

The compression clamps are very solid due to two connecting points secured through a FCS compatible set of screws for fine tuning.

PRECISE FIT

The inner tube fit to the shaft is impeccable and there is absolutely no play. There are no holes drilled either on the extension or the shaft, so the construction is not compromised.

3-PIECE PADDLES

The nice feature to the 3 piece paddles is that the extension can be attached directly to the bottom part to work nicely as a kids paddle.

BOARDBAG LIGHT SUP for 2015

Surf 7‘4“x27“ | Surf 8‘0“x28“ | Surf 8‘2“x29“ | Surf 8‘6“x29“ | Surf/YoungGunWindsurfSUP/Venus 8‘10x30“ | Surf 9‘2“x30“ | Surf 9‘6“x31“ | SurfWideBody 7‘4“x31“ | SurfWideBody 8‘2“x32“ | SurfWideBody 8‘8“x32“ | SurfWideBody 9‘3“x32“ | Fusion 8‘5“x30“ | Fusion/Venus 9‘8“x31“ | Fusion 10‘2x32“ | Fusion 10‘8x34“ | Allround/Venus 10‘6“x30“ | Allround 11‘2“x30“ | Allround 11‘8“x31“ | Allround 12‘0“x32,5“ | WideBody 9‘9“x32“ | WideBody/Venus 10‘0“x33.5“ | WideBody 10‘2“x35“ | WideBody/WindsurfSUP 10‘9“x32“ | Hybrid 10‘8“ x 31 | Hybrid 11‘6“ x 32 | Sportster 11‘4“ | Sportster 12‘6“ | Sportster 14‘0“

boardbags-SUP_light

BOARDBAGS HEAVY DUTY

Sportster 11‘4“ | Sportster 12‘6“ | Sportster 14‘0“ | Race 12‘6“ | Race 14“

boardbags-SUP_Race

SUP-tech-prosurf

SUP-tech-woodedition

SUP-tech-ast