Radical Quad, Thruster Quad, Magic Ride, Young Gun Quad
6 + 4 mm = 10mm pads in the heel area
Great shock absorbing effect – very comfortable. Your heels are higher on the boardfor more power and control on your forefoot. Initiating turns is really easy.
Freestyle Wave, Freestyle, All Ride, X-Cite Ride, Super Sport, Young Gun Freestyle
6 + 4 mm = 10mm pads in the actual standing area provide unbelievable shock absorption and comfort.
Even after sailing in super choppy conditions your joints will not hurt anymore.
Straps incl. 2 screws.
Rounded plastic belts, pre-formed, comfortable shape. Adjustable plastic plates for width adjustment.
Ideal arch shape to perfectly fit your feet. Thick neoprene cover for great comfort.
Adjustable in width not just in length as all other straps on the market. By simply turning the plastic plate by 180 degrees, the width of the foostraps can be reduced by 0.6cm (one plate) respectively 1,2cm (both plates). Great for slalom sailors who need a tight connection to the board and for youngsters or women with smaller feet.
incl. 2 screws. Comfortable padding, changeable to asymmetrical shape when the strap is not centered – very comfortable!
symmetrical – for rear center strap
asymmetrical – for front straps and rear straps on the rail
Straps incl. 4 screws.
4screw strap – no twist. Specially smooth and comfortable edge for switch stance sailing. Huge width adjustment.
Store your board in mild (neither hot, nor cold; not exposed to sunlight), dry places ! Winter storage: non-freezing (constantly above +5°C).
Avoid storage in closed, damp conditions like in a wet boardbag! So, after windsurfing and safe transport put the board out of its bag and let both dry separately – otherwise your board will suffer from osmosis and blisters (bubbles) will show up on the boards surface. And your bag might start to smell.
Damages caused by impacts are not covered under JP-Australia’s limited warranty. Therefore, JP-Australia highly recommends the use of a nose protector.
Especially recommended for novices and everybody, who wants to protect the board nose.
The universal protector:
Made of EVA, the UNI NOSE PROTECTOR is a very light yet strong protection. It is easy to handle as it is simply glued onto the nose.
The set consists of 5 pieces: 2 side parts (one left and one right), and 3 connections in sizes Small, Medium and Large.
By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently.
This makes it an universal protector not only for JP boards but for most boards available on the market.
Please note: The uni nose protector is not made for the use on demo boards or in windsurfing centers, but for private use only!
LIMITED FINISH – LESS IS MORE
Since 2004 the first JP PRO Edition boards have a (SUPER) LIMITED FINISH. By reducing the amount of paint (sanding off) the weight is decreased. Consequently, the boards have a custom look with certain “imperfections” in the paint, thus the material below might shine through. Sometimes they even look as if repaired. This is also true for the Full Wood Sandwich boards as they now feature a LIMITED FINISH, too. You won’t find two boards exactly the same. We believe this is worth it as the weight reduction is substantial and there’s no loss of durability or strength.
We highly recommend to open the air valve screw when the board is not used. Reason: Due to high pressure differences the sandwich construction suffers from high stress and can delaminate long term from the board’s core. This will result in a soft spot and start absorbing water. Pressure differences are caused by high temperature variations or other pressure variations from e.g. aero planes. Do not forget to close the air vent before going on the water!
Heavy duty padding, compression belts, extra padding on nose and side, comfortable handles. Takes up to 4 boards. Flight approved.
240 x 70 cm / 265 x 80 cm