DOUBLE HEEL PADS
Twinser Quad, Single Thruster, Young Gun Quad, Young Gun 85
6 + 4 mm = 10mm pads in the heel area
Great shock absorbing effect – very comfortable. Your heels are higher on the boardfor more power and control on your forefoot. Initiating turns is really easy.
DOUBLE COMFORT PADS
Freestyle Wave, Freestyle, All Ride, X-Cite Ride, Super Sport, Young Gun Freestyle
6 + 4 mm = 10mm pads in the actual standing area provide unbelievable shock absorption and comfort.
Even after sailing in super choppy conditions your joints will not hurt anymore.
Straps incl. 2 screws.
Rounded plastic belts, pre-formed, comfortable shape. Adjustable plastic plates for width adjustment.
SPECIAL FOOTSTRAPS PRE-SHAPED
Ideal arch shape to perfectly fit your feet. Thick neoprene cover for great comfort.
Adjustable in width not just in length as all other straps on the market. By simply turning the plastic plate by 180 degrees, the width of the footstraps can be switched from 14,2cm to 13,0cm. Great for slalom sailors who need a tight connection to the board and for youngsters or women with smaller feet.
Adjust your Foot Strap SIZE for very large foot strap sizes, change the Anti Twist plate for the outside position (recommended for foot size 44 and up)
- remove the screw
- remove the Anti Twist plate
- insert the Anti Twist plate into the holes of the profile belt
- put hte top plastic part back on the pins
- insert the screw
- adjust the size of the foot strap to fit your foot
5 Steps for a NARROW Foot Strap:
- remove the screw
- pull off the top plastic part
- rotate the top plastic part 180°
- put it back on the pins
- insert screw and mount the strap
incl. 2 screws. Comfortable padding, changeable to asymmetrical shape when the strap is not centered - very comfortable!
symmetrical - for rear center strap
asymmetrical - for front straps and rear straps on the rail
Super Sport, Super Lightwind, Formula, Slalom
Less wetted area and volume in the tail for increased control, better top speed,
and easier jibing.
black outline: conventional shape | red area: new race deck shape | blue outline: old race deck shape
The raised area underneath your forefoot and toes provides unknown comfort and control when going at full speed. You easily stay connected to the board no matter how strong the wind gets.You never feel like you are getting pulled out of your straps - no need to bend up your toes to stay in the straps.
Old race deck shape (blue): SUPER LIGHTWIND
New race deck shape (red): SUPER SPORT, SLALOM
BOARD/FIN COMBINATION CHART
|Tuttle Box (& DTB)
|SUPER LIGHTWIND (Carbon)
|WEED FREERIDE & SLALOM (G10)
||This fin comes with the board
Store your board in mild (neither hot, nor cold; not exposed to sunlight), dry places ! Winter storage: non-freezing (constantly above +5°C).
Avoid storage in closed, damp conditions like in a wet boardbag! So, after windsurfing and safe transport put the board out of its bag and let both dry separately - otherwise your board will suffer from osmosis and blisters (bubbles) will show up on the boards surface. And your bag might start to smell.
Damages caused by impacts are not covered under JP-Australia's limited warranty. Therefore, JP-Australia highly recommends the use of a nose protector.
Especially recommended for novices and everybody, who wants to protect the board nose.
The universal protector:
Made of EVA, the UNI NOSE PROTECTOR is a very light yet strong protection. It is easy to handle as it is simply glued onto the nose.
The set consists of 5 pieces: 2 side parts (one left and one right), and 3 connections in sizes Small, Medium and Large.
By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently.
This makes it an universal protector not only for JP boards but for most boards available on the market.
Please note: The uni nose protector is not made for the use on demo boards or in windsurfing centers, but for private use only!
LIMITED FINISH - LESS IS MORE
Since 2004 the first JP PRO Edition boards have a (SUPER) LIMITED FINISH. By reducing the amount of paint (sanding off) the weight is decreased. Consequently, the boards have a custom look with certain "imperfections" in the paint, thus the material below might shine through. Sometimes they even look as if repaired. This is also true for the Full Wood Sandwich boards as they now feature a LIMITED FINISH, too. You won't find two boards exactly the same. We believe this is worth it as the weight reduction is substantial and there's no loss of durability or strength.
We highly recommend to open the air valve screw when the board is not used. Reason: Due to high pressure differences the sandwich construction suffers from high stress and can delaminate long term from the board's core. This will result in a soft spot and start absorbing water. Pressure differences are caused by high temperature variations or other pressure variations from e.g. aero planes. Do not forget to close the air vent before going on the water!
- BOARDBAG LIGHT - XS / 230 x 60 cm
2014: Twinser Quad 68-92, Single Thruster 73-93, Freestyle Wave 77, Freestyle 90, Young Gun Quad & Freestyle
- BOARDBAG LIGHT - S / 240 x 65 cm
2014: Twinser Quad 99, Single Thruster 103, Freestyle Wave 85-111, Freestyle 100-106, All Ride 96-106, Super Sport 100, Young Gun 85, Slalom 59-66
- BOARDBAG LIGHT - M / 245 x 70 cm
2014: All Ride 116, Magic Ride 104, Super Sport 112, Young Gun 115, Slalom 68
- BOARDBAG LIGHT - L / 250 x 75 cm
2014: Magic Ride 118, X-Cite Ride Plus 125-135, Super Sport 124
- BOARDBAG LIGHT - XL / 255 x 80 cm
2014: X-Cite Ride Plus 145-160, Super Sport 136, Slalom 80
- BOARDBAG LIGHT - XXL / 240 x 90 cm
2014: Magic Ride 132, Superlight Wind 90, Slalom 84
- BOARDBAG LIGHT - XXXL / 250 x 95 cm
2014: Superlight Wind 92
Heavy duty padding, compression belts, extra padding on nose and side, comfortable handles. Takes up to 4 boards. Flight approved.
240 x 70 cm / 265 x 80 cm