JP 2014

Twinser Quad

68 • 74 • 82 • 92 • 99

  • PRO

boards_logos_twinserquad

PRO EDITION, Technologie S-Glass, latte raidissante et rail en carbone

DES VIRAGES RADICAUX POUR TOUS

La performance des Twinsers Quads en conditions side-shore est désormais une source sure. Tous les riders connus ont adopté cette planche principalement grâce à la radicalité de ses virages. Kauli, en lançant le concept du Twinser Quad a créé la notoriété de ces planches associé à son style unique. Il s’est énormément investi dans la gamme JP dans le but d’avoir une gamme de Quads qu’il peut utiliser partout dans le monde dans tout type de conditions, et pas seulement quand il s’agit de conditions down the line.

Cette nouvelle gamme de planches s’illustre également dans des domaines dans lesquels les Quads sont moins performantes : planer rapidement, aller vite et remonter au vent facilement sont ses nouveaux atouts.

SHAPE

Lors du processus de développement, nous avons testé différents concepts pour la carène. Le concept que Kauli et Jason préféraient combine un double concave dans la section médiane qui devient un V plat sur l’arrière. Cela permet de dessiner une carène plutôt plate, rendant le départ au planning facile et générant de fortes accélérations pour permettre d’atteindre des vitesses élevées.

Le V croissant vers l’arrière accentue la courbe sous les rails. Caractéristique incontournable pour les adeptes du down the line.

L’outline étiré associé au léger tuck line permet de passer les vagues avec une bonne accroche et stabilité. Ajuster l’angle pour jumper et se lancer dans des figures aériennes devient un jeu d’enfant.

Le volume a été augmenté sur l’arrière, ce qui donne plus de flottabilité derrière le pied de mât et autour des footstraps. La planche devient plus stable facilitant le départ au planing.
Nous avons également déplacé les footstraps légèrement sur l’arrière pour des virages plus radicaux dans les petites vagues.

EN RÉSUMÉ

En Twinser ou en Quad – à vous de décider comment utiliser votre planche selon les conditions. En Quads, elles accrochent davantage avec un meilleur contrôle en surf. En Twinsers, les planches sont légèrement plus volatiles mais vous permettront de planer et d’accélérer facilement dans les conditions onshore (nous vous recommandons un aileron de 2 cm plus long dans des conditions équivalentes). La gamme Twinser Quad se démarque par sa grande plage d’utilisation et ses performances impressionnantes dans toutes les conditions de vagues. Grâce à elles, vous effectuerez des slashs dont vous ne vous seriez jamais senti capable.

Description

Specifications

Twinser Quad Length
cm / inch
Width
cm / inch
Volume
liters
W. PRO +/-6%
kg / lbs
Quad Fins Shaper Sails
68 227
7'5"
53
20.9"
68 5.8
12.8
2x Twinser Wave 13 G10 (US)
2x Side Fin 10 G10 (MT)
Gnigler ideal: <5.0
rec.: <5.2
74 227
7'5"
55
21.7"
74 5.9
13.0
2x Twinser Wave 14 G10 (US)
2x Side Fin 10 G10 (MT)
Gnigler ideal: 4.0-5.2
rec.: <5.5
82 227
7'5"
57
22.4"
82 6.2
13.7
2x Twinser Wave 15 G10 (US)
2x Side Fin 10 G10 (MT)
Gnigler ideal: 4.5-5.6
rec.: 4.2-6.0
92 227
7'5"
59
23.3"
92 6.4
14.1
2x Twinser Wave 16 G10 (US)
2x Side Fin 10 G10 (MT)
Gnigler ideal: 5.0-6.0
rec.: 4.4-6.2
99 231
7'7"
61
24.1"
99 6.7
14.8
2x Twinser Wave 17 G10 (US)
2x Side Fin 10 G10 (MT)
Gnigler ideal: 5.2-6.2
rec.: >4.7
Twinser Quad 68
Length
cm / inch
227
7'5"
Width
cm / inch
53
20.9"
Volume
liters
68
W. PRO +/-6%
kg / lbs
5.8
12.8
Quad Fins2x Twinser Wave 13 G10 (US)
2x Side Fin 10 G10 (MT)
ShaperGnigler
Sailsideal: <5.0
rec.: <5.2
Twinser Quad 74
Length
cm / inch
227
7'5"
Width
cm / inch
55
21.7"
Volume
liters
74
W. PRO +/-6%
kg / lbs
5.9
13.0
Quad Fins2x Twinser Wave 14 G10 (US)
2x Side Fin 10 G10 (MT)
ShaperGnigler
Sailsideal: 4.0-5.2
rec.: <5.5
Twinser Quad 82
Length
cm / inch
227
7'5"
Width
cm / inch
57
22.4"
Volume
liters
82
W. PRO +/-6%
kg / lbs
6.2
13.7
Quad Fins2x Twinser Wave 15 G10 (US)
2x Side Fin 10 G10 (MT)
ShaperGnigler
Sailsideal: 4.5-5.6
rec.: 4.2-6.0
Twinser Quad 92
Length
cm / inch
227
7'5"
Width
cm / inch
59
23.3"
Volume
liters
92
W. PRO +/-6%
kg / lbs
6.4
14.1
Quad Fins2x Twinser Wave 16 G10 (US)
2x Side Fin 10 G10 (MT)
ShaperGnigler
Sailsideal: 5.0-6.0
rec.: 4.4-6.2
Twinser Quad 99
Length
cm / inch
231
7'7"
Width
cm / inch
61
24.1"
Volume
liters
99
W. PRO +/-6%
kg / lbs
6.7
14.8
Quad Fins2x Twinser Wave 17 G10 (US)
2x Side Fin 10 G10 (MT)
ShaperGnigler
Sailsideal: 5.2-6.2
rec.: >4.7

They come with the Quad Fin set-up which consists of 2 Twinser fins, 2 Side fins and 2 Mini Tuttle plugs.
For Twinser use we recommend 2cm bigger Twinser fins (not included) for the same conditions and to insert the 2 plugs to cover the Mini Tuttle Boxes.

DOUBLE HEEL PADS

Twinser Quad, Single Thruster, Young Gun Quad, Young Gun 85 6 + 4 mm = 10mm pads in the heel area Great shock absorbing effect – very comfortable. Your heels are higher on the boardfor more power and control on your forefoot. Initiating turns is really easy.    

DOUBLE COMFORT PADS

Freestyle Wave, Freestyle, All Ride, X-Cite Ride, Super Sport, Young Gun Freestyle  6 + 4 mm = 10mm pads in the actual standing area provide unbelievable shock absorption and comfort. Even after sailing in super choppy conditions your joints will not hurt anymore.

Footstrap

Straps incl. 2 screws. Rounded plastic belts, pre-formed, comfortable shape. Adjustable plastic plates for width adjustment. Footstrap-2014  

SPECIAL FOOTSTRAPS PRE-SHAPED

Ideal arch shape to perfectly fit your feet. Thick neoprene cover for great comfort.

ADJUSTABLE WIDTH

Adjustable in width not just in length as all other straps on the market. By simply turning the plastic plate by 180 degrees, the width of the footstraps can be switched from 14,2cm to 13,0cm. Great for slalom sailors who need a tight connection to the board and for youngsters or women with smaller feet.

Adjust your Foot Strap SIZE for very large foot strap sizes, change the Anti Twist plate for the outside position (recommended for foot size 44 and up)

  • remove the screw
  • remove the Anti Twist plate
  • insert the Anti Twist plate into the holes of the profile belt
  • put hte top plastic part back on the pins
  • insert the screw
  • adjust the size of the foot strap to fit your foot

5 Steps for a NARROW Foot Strap:

  • remove the screw
  • pull off the top plastic part
  • rotate the top plastic part 180°
  • put it back on the pins
  • insert screw and mount the strap

 

3D Footstrap

incl. 2 screws. Comfortable padding, changeable to asymmetrical shape when the strap is not centered - very comfortable!

set-up

symmetrical - for rear center strap asymmetrical - for front straps and rear straps on the rail

Download:

HowToAdjust.pdf
BOARD/FIN COMBINATION CHART
QUAD FIN USE TWINSER FIN USE
US Box Board TWINSER QUAD TWINSER QUAD
Size 68 74 82 92 99 68 74 82 92 99
Size Length Area cm² Recomm. Sails <5.2 <5.5 4.2-6.0 4.4-6.2 >4.7 <5.2 <5.5 4.2-6.0 4.4-6.2 >4.7
POLAKOW TINSER WAVE (G10)
13.5 5.3" 88 <5.2 <5.0 4.0-5.0 <4.7
14.5 5.7" 96 <5.5 4.4-5.2 4.0-5.2 4.2-5.0 <5.0 <4.7 <4.7
15.5 6.1" 104 <5.6 5,2 5.2-5.6 4.5-5.5 <5.6 <5.6 <5.0 4.0-5.0 <4.7
16.5 6.5" 110 4.2-6.0 5,5 4.7-5.8 5.0-6.0 5.0-6.0 4.4-5.2 4.0-5.2 4.2-5.0 <5.0 <5.0
17.5 6.9" 120 4.7-6.2 5.5-6.0 5.5-6.2 5.5-6.2 5,2 5.2-5.6 4.5-5.5 <5.6 <5.6
TINSER WAVE (G10)
12.0 4.7" 95 <5.0 <5.0 <5.0
13.0 5.1" 92 <5.2 <5.0 4.0-5.0 <4.7
14.0 5.5" 106 <5.5 4.4-5.2 4.0-5.2 4.2-5.0 <4.7 <4.7 <4.7 <4.7
15.0 5.9" 118 4.2-5.6 5,2 5.2-5.5 4.5-5.6 <5.2 <5.2 <5.0 4.0-5.0 4.0-5.0
16.0 6.3" 125 4.7-6.2 5,5 4.7-5.8 5.0-6.0 5.0-6.0 4.4-5.2 4.0-5.2 4.2-5.0 <5.0 <5.0
17.0 6.7" 133 4.7-6.5 5.5-6.0 5.5-6.2 5.2-6.2 5,2 5.2-5.5 4.5-5.6 <5.5 <5.5
18.0 7.1" 147 5.5-6.2 5,5 4.7-5.8 5.0-6.0 5.0-6.0
WEED TINSER WAVE (G10) only recommended to be used as Twinser fins
16.0 6.3" 168 <5.0 <5.0 <5.0 <5.0 <5.0 <5.0
18.0 7.1" 192 >4.7 >4.7 >4.7 >4.7 >4.7 >4.7
SIDE FIN (G10)
9.0 3.5" 47
10.0 3.9" 52
 
This fin comes with the board Boards come 2x with this fin size and 2 Side Fins (Quad set-up) + 2 covers for the Mini Tuttle Box For Twinser-use in the same range use 2cm bigger fins (table on the right).
STORAGE Store your board in mild (neither hot, nor cold; not exposed to sunlight), dry places ! Winter storage: non-freezing (constantly above +5°C). Note: Avoid storage in closed, damp conditions like in a wet boardbag! So, after windsurfing and safe transport put the board out of its bag and let both dry separately - otherwise your board will suffer from osmosis and blisters (bubbles) will show up on the boards surface. And your bag might start to smell.   NOSE PROTECTOR Damages caused by impacts are not covered under JP-Australia's limited warranty. Therefore, JP-Australia highly recommends the use of a nose protector. Especially recommended for novices and everybody, who wants to protect the board nose. The universal protector: Made of EVA, the UNI NOSE PROTECTOR is a very light yet strong protection. It is easy to handle as it is simply glued onto the nose. The set consists of 5 pieces: 2 side parts (one left and one right), and 3 connections in sizes Small, Medium and Large. By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently. This makes it an universal protector not only for JP boards but for most boards available on the market. Please note: The uni nose protector is not made for the use on demo boards or in windsurfing centers, but for private use only! DOWNLOAD: NoseProtector_Uni_Manual.pdf LIMITED FINISH - LESS IS MORE Since 2004 the first JP PRO Edition boards have a (SUPER) LIMITED FINISH. By reducing the amount of paint (sanding off) the weight is decreased. Consequently, the boards have a custom look with certain "imperfections" in the paint, thus the material below might shine through. Sometimes they even look as if repaired. This is also true for the Full Wood Sandwich boards as they now feature a LIMITED FINISH, too. You won't find two boards exactly the same. We believe this is worth it as the weight reduction is substantial and there's no loss of durability or strength.   AIR VALVE airvalveWe highly recommend to open the air valve screw when the board is not used. Reason: Due to high pressure differences the sandwich construction suffers from high stress and can delaminate long term from the board's core. This will result in a soft spot and start absorbing water. Pressure differences are caused by high temperature variations or other pressure variations from e.g. aero planes. Do not forget to close the air vent before going on the water!
  • BOARDBAG LIGHT - XS / 230 x 60 cm 2014: Twinser Quad 68-92, Single Thruster 73-93, Freestyle Wave 77, Freestyle 90, Young Gun Quad & Freestyle
  • BOARDBAG LIGHT - S / 240 x 65 cm 2014: Twinser Quad 99, Single Thruster 103, Freestyle Wave 85-111, Freestyle 100-106, All Ride 96-106, Super Sport 100, Young Gun 85, Slalom 59-66
  • BOARDBAG LIGHT - M / 245 x 70 cm 2014:  All Ride 116, Magic Ride 104, Super Sport 112, Young Gun 115, Slalom 68
  • BOARDBAG LIGHT - L / 250 x 75 cm 2014: Magic Ride 118, X-Cite Ride Plus 125-135, Super Sport 124
  • BOARDBAG LIGHT - XL / 255 x 80 cm 2014: X-Cite Ride Plus 145-160, Super Sport 136, Slalom 80
  • BOARDBAG LIGHT - XXL / 240 x 90 cm 2014: Magic Ride 132, Superlight Wind 90, Slalom 84
  • BOARDBAG LIGHT - XXXL / 250 x 95 cm 2014: Superlight Wind 92

boardbag

TEAMRIDER BOARDBAG

Heavy duty padding, compression belts, extra padding on nose and side, comfortable handles. Takes up to 4 boards. Flight approved. 240 x 70 cm / 265 x 80 cm

boardbag_teamrider